• How to chose correct injection mould

    How to chose correct injection mould

    Plastic injection mould design types and configurations vary enormously due to the many technical requirements of the moulded components to be produce...

    29-10-2020 News
  • What factors affect mold performance

    What factors affect mold performance

    The Plastic injection mould building is very complicated. So many details need to work together. From design, machining, assembling, test and fix then...

    22-10-2020 News
  • How to design a good turnover box mould

    How to design a good turnover box mould

    Plastic Blowing mould turnover boxes are currently a hot-selling product and are used in product turnover in all walks of life. For the turnover box m...

    14-10-2020 News
  • How to predict the shrinkage rate of an injection mold

    How to predict the shrinkage rate of an injection mold

    One thing Preform PET mould you should always pay attention to is the crystallization of the material, which is the largest part of shrinkage. And thi...

    29-09-2020 News
  • How to choose an injection mold supplier

    How to choose an injection mold supplier

    By Cap mould following proper part design, sink marks can be minimized. If there are any ribs or structural features behind the  shaped surface, the d...

    23-09-2020 News
  • Why does injection molding warp

    Why does injection molding warp

    Increase shrinkage Preform PET mould shorter cooling time in injection mould. Higher mould temperature. Greater product thickness. Higher resin melt t...

    18-09-2020 News
CONTACT US