As we known, the big advantage of Blow Moulding is being able to make hollow items.
What's more a seamless hollow item, not something made by joining two halves together. Blow Moulding is a much cleaner simpler way to be leak free. Great for putting liquids in.
So an ideal process for making containers, bottles, fuel tanks, IBCs, kayaks, flotation devices.
It's even possible to mould in handles too.
The only other common method to make one piece hollow items that we can think of is Rotational Moulding, which is a less precise process and it’s slower cycle time cannot compete with that of Blow Moulding.
At which point let's note that there are two distinct methods for doing Blow Moulding.
Extrusion Blow Moulding
Injection-Stretch/Stretch Blow Moulding
The former is the standard method of Blow Moulding while the latter is a method specific to the making of PET soda and water bottles.
The mold injection molding cycle is short, high efficiency, long life and low cost.It adopts international advanced level special flow channel design,
An injection molding machine is a piece of equipment used to manufacture plastic products. It works by injecting molten plastic into a mold, then cool
Blowing mould – Plastic bottle Most plastic materials are PET& PE, which are formed by blow molding. High efficiency and high output can be achi
Cavity core steel: using StaVaxS420 manufactured by Assab, Sweden, it is stainless steel and tempered steel gate type: hot runner point gate product p
Handle Mould The handle has a side handle and a lifting handle on the neck of the bottle mouth, both to facilitate lifting the bottle. They are of var
PPR Pipe Fitting Mould PPR pipe fittings are used for pipe joints underground and deep in the building facade, which are divided into internal and ext
PVC Pipe Fitting Mould PVC pipe fittings with thin wall thickness are commonly used for water pipes. Most wire pipe valve connections use a size of 20