1. The material of the main working parts of the mold is not properly selected. The material has poor performance and is not wear-resistant; the die steel has not been refined and has a large number of smelting defects; the convex and concave die, the forging blank forging process is not perfect, and there are hidden dangers of heat treatment.
2. The design of the die structure is unreasonable. The slender punch is not designed with a reinforcement device, the discharge port is not well stacked, and the discharge force is too high. The ambassador punch is subject to increased alternating loads and so on.
3. The mold making process is imperfect, mainly manifested in the inherently poor quality of the male and female forging billets, and the heat treatment technology and process are problematic, causing the male and female molds to be hardly penetrated, with soft spots and uneven hardness. Sometimes micro-cracks, or even cracks, grinding and polishing are not in place, and the surface roughness value is too large.
4. No lubrication or lubrication but the effect is not good.
The mold injection molding cycle is short, high efficiency, long life and low cost.It adopts international advanced level special flow channel design,
An injection molding machine is a piece of equipment used to manufacture plastic products. It works by injecting molten plastic into a mold, then cool
Blowing mould – Plastic bottle Most plastic materials are PET& PE, which are formed by blow molding. High efficiency and high output can be achi
Cavity core steel: using StaVaxS420 manufactured by Assab, Sweden, it is stainless steel and tempered steel gate type: hot runner point gate product p
Handle Mould The handle has a side handle and a lifting handle on the neck of the bottle mouth, both to facilitate lifting the bottle. They are of var
PPR Pipe Fitting Mould PPR pipe fittings are used for pipe joints underground and deep in the building facade, which are divided into internal and ext
PVC Pipe Fitting Mould PVC pipe fittings with thin wall thickness are commonly used for water pipes. Most wire pipe valve connections use a size of 20