Blow Molding Is A Specific Manufacturing Process

Update: 28-11-2019
Abst:

Blow molding is a specific manufacturing process by which hollow plastic parts are formed and can be joined together. It is also used for forming glass bottles or other hollow shapes.

In general, there are three main types of blow molding:

extrusion blow molding, injection blow molding, and injection stretch blow molding.

The blow molding process begins with melting down the plastic and forming it into a parison or, in the case of injection and injection stretch blow molding (ISB), a preform. The parison is a tube-like piece of plastic with a hole in one end through which compressed air can pass.

The parison is then clamped into a mold and air is blown into it. The air pressure then pushes the plastic out to match the mold. Once the plastic has cooled and hardened the mold opens up and the part is ejected. The cost of blow molded parts is higher than that of injection-molded parts but lower than rotational molded parts.

Ysmou News

Contact us now

CONTACT US